How To Use A Rangefinder Scope

How To Use A Rangefinder Scope

Shooting is an outstanding game that keeps you intact in a productive way. Shooting and hunting without using any gadgets is a separate thing but shooting with the proper use of accessories takes the game to another level. Why not focus on rangefinders first? Something fundamental and very tricky to use. Yes, we are talking about the rangefinders scopes, which are helpful to find out the distance between you and your target.

The use of a rangefinder during hunting and shooting increases the effectiveness and productivity of your hunting game. This scope increases the interest and adventure of hunting because of the accuracy it provides in your target. Keep in mind that to make the rangefinder scope valuable and efficient, you need to learn how to use it. For this purpose, we have prepared this article for you to make you able to understand every detail and description you need to know.

How To Use A Rangefinder Scope

Without the proper use of the rangefinder scope, you will not get accurate measurements of yourself and your target. Described is the procedure of using the rangefinder scope accurately for you to make it work more effectively and productively.

Set-up And Adjustment

Setting up a rangefinder scope is not very tough but needs proper guidance; otherwise, it will not work effectively. If the adjustment of the range finders scope is made precisely and correctly, it will give you accurate results. There is a plus point in the positioning of the rangefinder scope; you have to put it on the location same as the ordinary scope. Moreover, the following is the detailed and step-by-step guide to make you learn how to use a rangefinder scope productively.

1. Zero Of Your Scope

Zeroing your scope is highly important because if the zero of the scope is accurate, then the range it will depict is correct. To make your scope 0, you can use various methods available. These methods depend upon the animal you will hunt and the scope and rifle you are using. Moreover, it also depends upon your preference. The most common and the oldest method of zeroing your scope is mentioned below. This is said to be the most reliable one too.

  1. Carefully take the three shots sets of the target.
  2. With proper attention, make sure to calculate the distance between the shots and bullseye.
  3. After measuring the distance, adjust the scope.
  4. After the adjustment of the scope, repeat the procedure again and again to ensure your consistency on target.

This is the oldest and the most appropriate method which is commonly used among hunters. Now we are heading towards the modern process, which involves the using of the boresight to zero your scope.

  1. It includes the barrel of the bore of a rifle scope and rifle to make proper and accurate concentration on your target.
  2. With proper and careful attention and focus, change the angle of the scope gradually and slowly.
  3. Change it until you think it is aligned with the marker or dot from the laser you are using.
  4. Do not move the gun and try to make sure the gun is appropriately stable. It means that your gun should not be vibrating or shaking as this can cause misalignment.
  5. Make sure the zeroing is accurate because this will affect the accuracy of the range.

2. Examine The Distance

To accurately find out the range between your target and you, you need to observe and make an assumption of the height of the target and the measurement of the scope. This means that you need to adjust the scope’s size after assuming the height of the target.

How To Use A Rangefinder Scope
  • Let us assume that the scope is adjusted to Coyote’s chest measurement.
  • There are different measurement marks made in the Coyote’s chest measurement that are responsible for representing the average size of the Coyote’s chest.
  • You will get the information of the measurement by calculating the lines which are taken up by the Coyote’s chest. The closer the target receives, the more lines are taken up.
  • There is an average range that says that if the Coyote’s take up two and a half lines, it means that it is somewhere around 200 yards away.

3. Adjustment of Reticle

  • Now it’s time to adjust the reticle of the scope. Get your scope, hold it and change the reticle properly on the target.
  • Now move the reticle a little up. You are currently on the adequate marker of the distance on the scope.
  • This marker depends upon the zeroing of the scope and the rifle.

FAQs

Yes, there are companies that are manufacturing the scopes which contain both the spotting scope and the rangefinder in them. At the same time, it is challenging to create such a scope because there are some products with both of these features in them that mess with the measurements and do not measure accurately. I will recommend you to go with the selection of either the rangefinder or the spotting scope, depending upon your needs.

It consists of the inbuilt rangefinder reticle. In this way, you would be able to get an appropriate calculation of the distance. These rangefinder scopes are responsible for giving you the average size of your target and the average distance between you and your target. With the help of this rangefinder scope, you can guess the range of the target.

Final Thoughts

For various purposes, shooting sometimes becomes self-defense and sometimes a part of a hunting game. Different gadgets aid your shooting game productively. The rangefinder is the one. Learning the correct way of using a rangefinder scope is an essential aspect to get precise shooting results.

We have tried our best in presenting the proper procedure and a step-by-step guide on how to use the rangefinder scope. This article is helpful for those who want to learn accurate shooting with gadgets. Make sure to focus and understand the main procedure for using rangefinder scope to get precise results.

Leave a Comment