Night visions are essential for hunters, military forces, and various other professionals. But just like other technical equipment, night vision can also get damaged so you need to know what causes night vision To be damaged.
A damaged night vision will not give you clear vision at night, making it useless. Therefore, it is crucial to take care of these devices and use them safely to protect them from any kind of damage.
To maintain your night vision, you need to know what causes night vision damage. In this article, we have discussed the factors that cause night vision to get damaged and various methods to make your night vision reusable if it gets damaged.
Causes of Night Vision To Get Damaged
Table of Contents
The following factors can make your perfectly fine working night vision device. It’s because several parts of the NV devices are sensitive to these factors, and even if only one part gets impaired, the NV doesn’t function properly.
1. Exposure to strong light
Created for seeing in the dark, it is not a good decision to expose your night vision to bright light. If a night vision device is exposed to bright or strong light, it will burn the image intensifier tube as it is designed only to amplify low light.
Once the image intensifier tube is burned out, it won’t work, and nothing will be visible from it in the dark. Therefore, do not take the risk and never face your NV device towards a source of bright light such as a bulb, torchlight, etc. otherwise, you will need to repair it, and that is going to cost you a lot.
2. Using high-voltage batteries
Every model and generation of night vision needs a more or less voltage depending on how powerful it is. Also, different night vision devices need specific voltage. If you use a high-voltage battery with a device that is incapable of handling such high voltage, it may get damaged.
3. Damage to the lens
The objective lens of an NV allows you to see through the device. If the lens of an NV gets damaged or broken, you will need to buy new ones.
The lens can be damaged if a sharp or heavy object happens to touch it. Besides, there is a special kind of sensitive coating on both lenses of an NV device. This coating is specifically for making the device waterproof or Water resistant. This coating can also be damaged by your finger or anything else.
4. Damage by Water or by dropping
Although most of the NV devices available now are waterproof and have a rubber-armored coating on them, still a few models without any coatings get damaged if you use them in the rain or fog or if they get dropped from your hands.
Water and fog not only make the view unclear but also permanently damage the lens.
Once any part of the device gets damaged or broken, you will need to find a new part of the same size and shape.
5. Trying your own techniques to repair it
Night vision devices are delicate and require to be handled with care. If you are a beginner or do not know how to fix the device. You should not try to repair it by yourself.
Also, some parts of the device, such as image intensifier tubes, require specific tools to be repaired, so you can not do it on your own.
Measures To Prevent Damaging Your Night Vision Devices:
Night visions are expensive, and no one likes to put money on something and damage it in a short span of time. This might happen if you don’t have proper knowledge about night visions and use them for the first time.
We are here to guide you about what you shouldn’t be doing if you want your NV device to last long.
Night Vision Care and Maintenance:
Always follow the user’s manual
Every NV device comes with a user manual to instruct you about the do’s and don’ts of using the device. Carefully read the instructions when you open the device and ask an expert’s opinion for anything you can’t figure out about it.
Do not expose it to bright light.
Bright lights can badly damage your night vision as the image intensifier tube of a night vision is supposed to amplify dim light, and if bright light enters it, it becomes dangerous for the lens. Therefore, keep your device away from bright light.
You might find a few models that can automatically turn off when the device is exposed to bright light, but it would still impact the device slowly
Clean your NV carefully.
You need to clean the tube and lens of the NVs from time to time. But always remember to use a clear and soft piece of cloth or simply the lens paper, which is also used to clean the cameras.
Avoid using your fingers or anything rough to clean the device, as it would leave a scratch on the lens.
Take care of the lens.
Keep your lens covered when not in use to keep them protected from dirt and dust particles. Regularly clean the lens carefully. Do not carry the device without a bag or strap to avoid dropping it during your trip.
Get to know about your NV device’s features.
For professionals, waterproof and fog proof NVs are better as they need to use them outdoors in different weather conditions, and the rain and fog can make the view blurry other than making them dirty.
Also, always learn about the various features of your night vision before starting to use it. This will also make it easier for you to control the device.
Turn off the device when not in use.
As night vision devices are powered by batteries, you should turn them off when not using them; otherwise, the battery power will drain.
The four different generations of night vision have different life expectancies of 1000 to 10,000 hours, and after that, you will need to change the batteries. Also, you can keep the batteries out if the device is not being used for a long span of time.
Conclusion
Night vision devices are very helpful devices, but they can get damaged easily. Thus, the above considerations are necessary for professionals.
These considerations are not at all difficult for a simple user, nor do they cause you anything. Besides, they will save you a lot of money. However, you might still need to change the parts of the night vision from time to time.